ABOUT PAINTERPICKS · EDITORIAL STANDARDS

Technique first. Gear second.

Most bad paint jobs get blamed on the brush or the sprayer when the real culprit was a 2,800 PSI pressure setting, a skipped 220-grit scuff sand, or latex primer over bleeding cedar knots. PainterPicks exists to teach the skill first—and only recommend the few tools that actually earn a spot in our own vans.

01 · WHAT WE COVER

Four core pillars

We focus strictly on residential painting and surface preparation: Sprayers & Tips, Brushes & Rollers, Prep & Repair, and Interior & Exterior Finishes.

02 · HOW WE WORK

Measured, repeatable steps

We never write vague advice like “thin as needed” or “adjust pressure until it looks good.” Every guide gives exact orifice numbers (310 vs 515), PSI ranges (1,300 PSI), sandpaper grits, and recoat windows.

03 · HOW WE MAKE MONEY

Clear separation of Tool Picks

We fund our testing through display advertising and Amazon affiliate links in our Tool Picks section. We never accept paid placements, never quote fluctuating prices, and cap buying guides at 3–4 tested winners.

04 · CORRECTIONS & CONTACT

Spot a spec error?

If a manufacturer updates a tip guard thread, pump flow rate, or VOC formula, email editor@painterpicks.com and we will verify and timestamp the correction at the top of the guide.

Our team

Led by residential painting contractor Jake Vance, our guides are field-tested on real drywall, baseboards, and cabinet doors.

EVERY SUNDAY

The Sunday Coat

One pro painting technique, one prep fix, one good read. Every Sunday.