Kitchen Cabinets From Zero
From greasy oak doors to a factory-smooth urethane finish you are proud of, in six parts. One skill per part, one practice task before you touch your kitchen.
overhead workbench: shaker cabinet door, Graco SG3 gun with FFLP 310 tip, 220 sanding sponge
The parts
Part 1
Degreasing, Labeling Hardware & Setting Up a Dust-Free Spray Bay
7 min
Read → Part 2
Why Shellac & High-Build Primers Stop Oak Tannin Bleed Before Topcoating
6 min
Read → 3 Part 3
Choosing an FFLP 310 Tip & Dialing In 1,300 PSI Without Tails
12 min
Start Part 3 4 Part 4
Spraying Face Frames & Boxes Indoors vs Rolling With a Mohair Mini-Sleeve
December
Notify
5 Part 5
Laying Two Wet Coats of 1K/2K Waterborne Urethane Without Runs or Orange Peel
December
Notify
6 Part 6
Cure Time vs Dry Time: Rehanging Doors, Installing Bumpers & 7-Minute Pump Flush
January
Notify
Who it’s for
You have (or are renting) an airless sprayer
Any homeowner piston pump (like a Graco Magnum X5 or X7) works when paired with a low-pressure 310 tip.
You have two weekends and a garage bay
We break prep, priming, and topcoating into manageable batches so your kitchen stays usable.
You want zero brush marks or sticky doors
Every orifice size, PSI setting, grit number, and dry-to-stack time is measured so you never guess.
THE WORKSHOP SHEET
Open the 1-page Spray Tip & PSI Reference Chart
Every tip orifice, fan width, filter mesh, and pressure sweet spot from this series on one printable page.
Open printable chartFROM THE TOOL PICKS DESK
The 5-tool cabinet spraying kit we use in this series
Graco Magnum X5, RAC X FFLP 310 tip, 60-mesh manifold strainer & prep sponges.
EVERY SUNDAY
The Sunday Coat
One pro painting technique, one prep fix, one good read. Every Sunday.